This manual provides comprehensive information about the Thermowatt Alloy 800 immersion heater, covering installation, operation, maintenance, troubleshooting, safety, technical specifications, warranty details, frequently asked questions, and contact information. The Thermowatt Alloy 800 is a high-quality immersion heater designed for use in domestic water systems, including unvented cylinders. It features a combined plug-in thermostat for both operation and safety cut-out, ensuring reliable and safe performance.
Introduction
Welcome to the Thermowatt Alloy 800 User Manual. This comprehensive guide is designed to provide you with all the information you need to install, operate, maintain, and troubleshoot your Thermowatt Alloy 800 immersion heater. The Thermowatt Alloy 800 is a high-quality immersion heater designed for use in domestic water systems, including unvented cylinders. It features a combined plug-in thermostat for both operation and safety cut-out, ensuring reliable and safe performance.
This manual covers various aspects of the Thermowatt Alloy 800, including⁚
- Product Overview⁚ A detailed description of the Thermowatt Alloy 800 immersion heater, its features, and specifications.
- Installation Instructions⁚ Step-by-step instructions on how to install the Thermowatt Alloy 800 immersion heater safely and correctly.
- Operation and Maintenance⁚ Guidance on how to operate the Thermowatt Alloy 800 immersion heater efficiently and safely, along with regular maintenance tips to ensure its longevity.
- Troubleshooting⁚ A comprehensive guide to identifying and resolving common problems you might encounter with the Thermowatt Alloy 800 immersion heater.
- Safety Information⁚ Essential safety precautions to ensure your safety while installing, operating, and maintaining the Thermowatt Alloy 800 immersion heater.
- Technical Specifications⁚ Detailed technical specifications of the Thermowatt Alloy 800 immersion heater, including its power rating, voltage, and dimensions.
- Warranty Information⁚ Information about the warranty coverage for the Thermowatt Alloy 800 immersion heater.
- Frequently Asked Questions (FAQs)⁚ Answers to frequently asked questions about the Thermowatt Alloy 800 immersion heater.
- Contact Information⁚ Contact details for Thermowatt customer support in case you need assistance or have any queries.
- Appendix⁚ Additional information and resources that may be helpful.
This manual serves as your comprehensive resource for understanding and utilizing your Thermowatt Alloy 800 immersion heater effectively. Please read this manual carefully before installing or operating the immersion heater. We recommend keeping this manual in a safe and accessible place for future reference.
Product Overview
The Thermowatt Alloy 800 is a high-performance immersion heater designed for use in domestic water systems, including unvented cylinders. This versatile heater is engineered to provide efficient and reliable hot water solutions for your home.
Key features of the Thermowatt Alloy 800 include⁚
- Alloy 800 Element⁚ Constructed with durable Alloy 800, this immersion heater offers exceptional resistance to corrosion and high temperatures, ensuring a long lifespan even in challenging water conditions.
- Immersed Length⁚ With a 14-inch immersed length, the Thermowatt Alloy 800 provides ample heating capacity for various sized water tanks.
- Combined Thermostat⁚ Equipped with a combined plug-in thermostat, this heater incorporates both operational and safety cut-out functionality. This feature ensures safe and efficient operation by automatically adjusting the temperature and shutting off the heater if necessary.
- High Temperature Range⁚ The Thermowatt Alloy 800 operates within a wide temperature range, making it suitable for various water heating applications.
- Compatibility⁚ This immersion heater is compatible with standard domestic water systems and is suitable for use in hard water areas.
- Unvented Cylinder Compatibility⁚ Specifically designed for use with unvented cylinders, the Thermowatt Alloy 800 provides a reliable solution for high-pressure water systems.
The Thermowatt Alloy 800 is a reliable and efficient choice for your water heating needs. With its robust construction, advanced features, and compatibility with unvented cylinders, this immersion heater ensures a dependable and safe hot water supply for your home.
Installation Instructions
Installing the Thermowatt Alloy 800 immersion heater requires careful attention to safety and proper procedures. It is crucial to follow these instructions meticulously to ensure a secure and functional installation.
Important Safety Note⁚ Before commencing installation, ensure the power supply to the water heater is disconnected. This is essential to prevent electric shock hazards.
Step 1⁚ Preparation
- Locate the existing immersion heater in your water tank.
- Remove the old immersion heater from the tank.
- Clean the immersion heater well to remove any debris or rust;
Step 2⁚ Installation
- Carefully insert the new Thermowatt Alloy 800 immersion heater into the water tank, ensuring it is properly seated.
- Connect the electrical wiring to the immersion heater, ensuring proper polarity (live, neutral, and earth).
- Secure the immersion heater in place using the provided mounting bracket and screws.
- Reinstall the water tank cover.
Step 3⁚ Testing and Completion
- Reconnect the power supply to the water heater.
- Test the immersion heater by turning it on and checking for any leaks or malfunctions.
- Ensure the thermostat is set to the desired temperature.
Remember, if you are unsure about any aspect of the installation process, consult a qualified electrician for assistance.
Operation and Maintenance
The Thermowatt Alloy 800 immersion heater is designed for straightforward operation and minimal maintenance. However, proper care and regular checks are essential to ensure its longevity and safety.
Operation⁚
- To operate the immersion heater, simply turn the thermostat to the desired temperature setting. The heater will automatically switch on and off to maintain the set temperature.
- The thermostat comes with a built-in safety cut-out, which will automatically disconnect the heater if the temperature exceeds the preset limit, preventing overheating.
- When not in use, it’s recommended to switch off the immersion heater to conserve energy.
Maintenance⁚
- Regularly inspect the immersion heater for any signs of damage, corrosion, or leaks.
- Ensure the thermostat is functioning correctly and the temperature setting is appropriate.
- If any issues are detected, immediately turn off the heater and contact a qualified electrician for inspection and repair.
- Avoid using harsh chemicals or abrasive cleaners on the immersion heater.
- Follow the manufacturer’s instructions regarding the use of cleaning agents for the water tank.
By adhering to these simple operation and maintenance guidelines, you can maximize the lifespan of your Thermowatt Alloy 800 immersion heater and enjoy reliable hot water for years to come.
Troubleshooting
While the Thermowatt Alloy 800 immersion heater is designed for reliable performance, occasional issues may arise. This section outlines common troubleshooting steps for potential problems you might encounter.
No Heating⁚
- Check Power Supply⁚ Ensure the power supply to the immersion heater is switched on and the circuit breaker is not tripped.
- Thermostat Fault⁚ Verify the thermostat is set to the desired temperature and is functioning correctly. If the thermostat is faulty, it needs to be replaced.
- Element Failure⁚ A faulty heating element can prevent the water from heating. If the element is damaged, it must be replaced by a qualified electrician.
Heating Intermittently⁚
- Thermostat Malfunction⁚ A malfunctioning thermostat can cause the heater to cycle on and off irregularly. Check the thermostat settings and consider replacing it if necessary.
- Scale Buildup⁚ Excessive scale buildup on the element can hinder heat transfer, leading to intermittent heating. Descaling the tank and element may resolve the issue.
Leaking⁚
- Connection Points⁚ Check for leaks at the connection points between the heater and the water tank. Tighten any loose connections or replace faulty seals.
- Element Damage⁚ A damaged element can cause leaks. If the element is cracked or corroded, it needs to be replaced.
If the above steps don’t resolve the issue, it’s advisable to contact a qualified electrician for further diagnosis and repair.
Safety Information
Your safety is our priority. Please read and understand the following safety instructions before installing, operating, or maintaining the Thermowatt Alloy 800 immersion heater. Failure to comply with these instructions may result in personal injury, property damage, or product malfunction.
Electrical Safety⁚
- Qualified Electrician⁚ Installation and repair of the immersion heater should only be carried out by a qualified electrician. Ensure all electrical work complies with local building codes and regulations.
- Proper Wiring⁚ Connect the immersion heater to a properly sized and protected electrical circuit. Use appropriate wiring and connectors for the power supply.
- Water Leakage⁚ Never operate the immersion heater if there is water leakage or any signs of damage to the electrical components. Immediately disconnect the power supply and contact a qualified electrician.
- Grounded Outlet⁚ Ensure the power outlet is properly grounded. A grounded outlet minimizes the risk of electrical shock.
Water Safety⁚
- Water Pressure⁚ Always ensure the water pressure in the system is within the specified range for the immersion heater. Excessive pressure can cause damage to the heater.
- Water Temperature⁚ Set the thermostat to a safe water temperature. Avoid exceeding the maximum allowable temperature to prevent scalding risks.
- Tank Inspection⁚ Regularly inspect the water tank for corrosion, leaks, or any signs of damage. Address any issues promptly to prevent potential hazards.
General Safety⁚
- Children⁚ Never allow children to operate or play near the immersion heater. Keep the heater out of their reach.
- Ventilation⁚ Ensure adequate ventilation in the area where the immersion heater is installed. Proper ventilation prevents overheating and potential hazards.
Technical Specifications
The Thermowatt Alloy 800 immersion heater is engineered to provide efficient and reliable heating for your domestic water system. This section outlines key technical specifications to aid in understanding its capabilities and suitability for your needs.
- Power Output⁚ 3kW (Kilowatts)
- Voltage⁚ 240V (Volts)
- Immersed Length⁚ 14 inches (35.56 cm)
- Element Material⁚ Alloy 800 (high-temperature resistant)
- Boss Size⁚ 1 3/4 inches (4;45 cm)
- Thermostat⁚ RTS/RTS PLUS (adjustable temperature, factory set to 80°C)
- Application⁚ Suitable for unvented cylinders and some thermal stores
- Water Hardness⁚ Compatible with standard domestic water areas, including hard water areas
Please note that these specifications are subject to change without prior notice. For the most up-to-date information, consult the product packaging or the Thermowatt website.
The Thermowatt Alloy 800 immersion heater is designed to meet the demands of modern domestic water heating systems. Its robust construction, high-quality materials, and reliable performance make it a trusted choice for homeowners seeking a reliable and efficient water heating solution.
Warranty Information
Thermowatt stands behind the quality and reliability of its products. The Thermowatt Alloy 800 immersion heater comes with a manufacturer’s warranty that provides coverage against defects in materials and workmanship under normal use and conditions.
The warranty period typically begins on the date of purchase and covers the immersion heater itself, excluding any accessories or installation costs. The specific warranty terms and conditions may vary depending on the country of purchase and the retailer. It is important to retain your original purchase receipt as proof of purchase.
During the warranty period, Thermowatt will, at its discretion, repair or replace any defective product. This warranty does not cover damage caused by misuse, neglect, accident, improper installation, or modifications made by unauthorized personnel. It also does not cover normal wear and tear, or damage resulting from the use of incompatible or unauthorized parts.
For warranty claims, contact Thermowatt directly through their website or customer service line. They will provide guidance on the necessary steps to initiate a claim and will require proof of purchase. Remember, a properly installed and maintained Thermowatt Alloy 800 immersion heater should provide years of reliable service.
Frequently Asked Questions
Here are some common questions regarding the Thermowatt Alloy 800 immersion heater⁚
Q⁚ What is the power rating of the Thermowatt Alloy 800 immersion heater?
A⁚ The Thermowatt Alloy 800 is available in various power ratings, with the most common being 3kW. The specific power rating will be indicated on the product label.
Q⁚ Is the Thermowatt Alloy 800 suitable for unvented cylinders?
A⁚ Yes, the Thermowatt Alloy 800 is specifically designed for use in unvented cylinders, providing efficient and reliable heating for your hot water system.
Q⁚ How do I adjust the temperature setting on the Thermowatt Alloy 800?
A⁚ The immersion heater comes with an adjustable thermostat, typically factory set to 80°C. To adjust the temperature, refer to the instructions provided with the thermostat.
Q⁚ How often should I check the thermostat and immersion heater for maintenance?
A⁚ It is recommended to check the thermostat and immersion heater annually for proper functioning and to ensure there are no signs of damage or wear. This regular inspection helps maintain safety and performance.
Q⁚ Where can I find replacement parts for the Thermowatt Alloy 800 immersion heater?
A⁚ Contact Thermowatt directly for information on replacement parts, or visit authorized retailers who stock their products. Ensure you use genuine Thermowatt parts to maintain optimal performance and safety.
Contact Information
For any inquiries, technical support, or assistance related to the Thermowatt Alloy 800 immersion heater, please contact Thermowatt using the following information⁚
Website⁚ Visit the Thermowatt website for product information, user manuals, and contact details. You can typically find a “Contact Us” or “Support” section on their website.
Email⁚ Send an email to the customer service or technical support email address provided on their website. Be sure to include your specific model number and any relevant details regarding your inquiry.
Phone⁚ Contact Thermowatt’s customer service hotline. The phone number should be readily available on their website or in any accompanying documentation.
Social Media⁚ Some companies maintain active social media accounts. If Thermowatt has a presence on platforms like Twitter or Facebook, you can reach out through these channels for support or general inquiries.
When contacting Thermowatt, be prepared to provide your model number, purchase date, and a brief description of your issue. This information will help them efficiently address your needs.